Installing Expansion Cards - Fujitsu Deskpower 5000 Series User Manual

Installing Expansion
Cards
This section explains how to install expansion cards, which extend the range of the features of
your PC.
Point
- To install an expansion card, set up the PC, turn off the power, and install the expansion
card.
- The first and second black slots from the top are for ISA cards. The third and fourth white
slots from the top are for PCI cards.
- Only a half-size expansion card can be installed in the first slot from the top.
- When an expansion card using a serial port such as a modem card is installed, change
the duplicated serial port to "Not used" in the BIOS setup (
parallel ports" in Section 3, "Detail Menu," in Chapter 4, "BIOS Setup").
WARNING
Electric shock
CAUTION
Injury
26
To prevent electric shock, before installing and removing expansion
cards, turn off the PC and connected units and unplug power cords
from respective outlets.
To prevent electric shock, fire, and/or malfunction, install only Fujitsu
brand expansion cards in the PC.
To prevent injury, when installing and removing expansion cards,
remove screws only from specified locations.
PCI bus
see "Setting the serial/
ISA bus