Securing The Bottom Casing Cover; Installing And Removing Memory Expansion - Fujitsu ESPRIMO Q55x Operating Manual

System expansions

Securing the bottom casing cover

► Place the bottom casing cover on the device (1).
► Slide the bottom casing cover in the direction of the arrow (2) until it engages noticeably.
► If you are using a locking bracket and a padlock to protect the device, close the locking
bracket and fasten the lock (see
or
► If you are using a locking bracket and a Kensington Lock cable to protect the device,
close the locking bracket and fasten the Kensington Lock cable (see
bracket", Page 52
► Position the device the correct way up again.

Installing and removing memory expansion

System expansion Removing memory Mainmemory Memorymodule System expansion
Please observe the safety information in chapter
The device must not be connected to the power supply when memory modules are
installed or removed, see
Only use memory extensions that have been approved for your device,
see chapter
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
You must open the service cover to remove or install the memory module.
The following description is identical for both memory modules.
88
2
"Using a locking bracket", Page
and "Using the Security Lock", Page
"Prepare to remove components", Page
"Technical data", Page
1
51).
"Important notes", Page
91.
52).
"Using a locking
13.
64.
Fujitsu