Supplement; Usb (For Pcs Using Windows 95/98); Installing Intranetware/Netware; (For Pcs Using Windows Nt) - Fujitsu Deskpower 5000 Series User Manual

Supplement

USB (for PCs using Windows 95/98)

○ ○ ○ ○ ○ ○ ○ ○
The Universal Serial Bus (USB) specifications are used to provide a common interface to
peripherals such as mouse, keyboard, printer, modem, and speakers.
Point
– Installing the dedicated device driver may be required, depending on the peripherals
supporting the USB.
– Operating systems Windows 95/98 support the USB.
– If USB devices are connected, Windows may not be terminated normally, depending on
the type of connected USB device. In such a case, remove the USB device and terminate
Windows.
Installing IntranetWare/NetWare (for PCs using Windows NT)
○ ○ ○ ○ ○ ○ ○ ○
To install IntranetWare™/NetWare
from the Windows NT setup disk so that the CD-ROM drive can be recognized from the PC
main unit.
Then, follow the operating system installation procedure.

Wake up On LAN

○ ○ ○ ○ ○ ○ ○ ○
Setting "Wake up on LAN" on the Power saving menu of the BIOS setup to "Enabled" turns
on the PC via LAN (WOL: Wake up On LAN). To use this function, be sure to turn on the
PC once more after connecting the power cord. Only connecting the power cord may not
operate this function normally.

Replacing a display

○ ○ ○ ○ ○ ○ ○ ○
When replacing a display with one having different specifications (particularly liquid crystal
display), a display error (such as no image on the screen) may occur.
When replacing a display, restore the settings of the resolution and refresh rate to the
factory settings.
- Resolution
- Refresh rate : Optimum (for PCs using Windows 95/98) or 60 Hz (for PCs using
If no image appears on the screen or a resolution that cannot be displayed is discovered
by replacing a display without making the above-cited settings, reinstall the display driver
as follows:
®
from the CD-ROM to your PC, start the PC main unit
: 800 x 600
Windows NT)
107