Video Features - Fujitsu Deskpower 5000 Series User Manual

– LAN Controller
This item sets whether the LAN adapter on the mother board is enabled.
- Disabled
The LAN adapter is disabled and resources are freed.
- Enabled (Initial value)
The LAN adapter is enabled.

Video Features

This submenu is used to set up the display.
Move the cursor to this item and press the Enter key to display a submenu as shown below.
PhoenixBIOS Setup Utility
Main Advanced Security
Video Features
Default Primary Video Adapter:
AGP Aperture Size:
↑↓
F1 Help Select Item
←→
ESCExit Select Menu
– Default Primary Video Adapter
This item sets which AGP adapter is used, the adapter on the PCI card or
the adapter on the mother board, when another PCI video card is mounted.
- PCI
The PCI video adapter card is used when another PCI video card is mounted,
otherwise the AGP adapter on the mother board is used.
- AGP (Initial value)
The AGP adapter on the mother board is used.
– AGP Aperture Size
This item sets the aperture size used by the AGP video controller.
- 8MB, 16MB, 32MB, 64MB, 128MB, 256MB (Initial value: 64MB)
Power Boot Info
Item Specific Help
[AGP] Select primary
[64MB] display.
AGP is standard
internal video
device.
[AGP]
AGP video device may
be primary display.
[PCI]
The BIOS searches
video device from PCI
slot 1-2-...to AGP.
-/Space Change Value F9
Select :Sub-Menu F10Save and Exit
Enter
Exit
Setup Defaults
4
59