Fujitsu Deskpower 5000 Series User Manual page 77

5
Press the Enter key to complete the password setup.
If the reentered password is incorrect, a Warning! window appears. Press the Enter key to
retry from Step 2.
To cancel password setup, press the Esc key.
Point
If the user starts setup operation by entering only a user password for a PC that requires
the input of both supervisor and user passwords, the setup items will be limited.
6
Select 'Exit Save Changes' on the Exit menu and press the Enter key.
The Setup Confirmation window then appears.
7
Select 'Yes' and press the Enter key.
The settings are saved.
8
Press the Power switch to turn off the power.
Point
Turn off the power while 'BIOS Setup' is displayed. If the power is turned off after BIOS
Setup has ended, password settings are invalid.
9
Set the jumper switch of the personal computer.
Change jumper switch JP5 from 2-3 to 1-2 on the computer. (For the location of jumper
switch JP5, see the following page.)
WARNING
Electric shock
CAUTION
Injury
To prevent electric shock, before changing jumper switches, turn off
the computer main and peripheral units and unplug the power cable.
The PC is very hot immediately after being turned off. Wait about ten
minutes and reboot.
4
67