Fujitsu Deskpower 5000 Series User Manual page 82

Point
This item is not available for Windows 98 and.
Power Switch Mode
Set whether to enter power savings mode or to turn off the power when the Power switch is
pressed.
- Power Off (Initial value)
The computer is turned off when the Power switch is pressed.
- Standby
The computer enters the power savings mode when the Power switch is pressed in
normal state and returns to normal state when pressed in power savings mode.
Point
- On WindowsNT, do not select [Standby].
- When Windows 98 runs in ACPI mode, the computer can be set to enter power savings
mode when the Power switch is pressed through Windows 98 setup, regardless of
'Power Switch Mode.'
Automatic Wake up
This item sets automatic boot or return from Standby mode using a submenu. Move the
cursor to this item and press the Enter key to display a submenu as shown below.
Main Advanced
Automatic Wake Up
Wake up on LAN
Wake up on Modem Ring
Wake up om PCI PME:
Wake up on Time:
Wake up Time:
Wake up Date:
↑↓
F1 Help Select Item
←→
ESCExit Select Menu
– Wake up LAN
This item sets whether to turn on the computer or to return from Standby mode when a
magic packet is received from the standard LAN port.
- Disabled (Initial value)
The computer is not turned on or returned from Standby mode after receiving a magic
packet.
- Enabled
The computer is turned on or returned from Standby mode after receiving a magic packet.
72
PhoenixBIOS Setup Utility
Security Power Boot
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[00:00:00]
[Every Day]
-/Space Change Value
Select :Sub-Menu F10Save and Exit
Enter
Info Exit
Item Specific Help
[Enabled]
The system will wake
up when internal LAN
Device receives a
magic packet in
Suspend mode or
Power off.
[Disabled]
The feature is
disabled.
*ACPI OS ignores
this setting
F9 Setup Defaults