Fujitsu Deskpower 5000 Series User Manual page 67

– Numlock
This item sets whether the keyboard tenkey pad is set to Numlock mode at boot or
reboot. In Numlock mode, the user can enter numeric values from the tenkey pad.
- On (Initiail value)
The keyboard is set to Numlock mode.
- Off
The keyboard is not set to Numlock mode.
Point
In some Oss, this has to be set on the OS side.
– PS/2 Mouse
This item enables the PS/2 mouse controller.
- Disabled
The PS/2 mouse controller is disabled and resources are freed.
- Enabled
The PS/2 mouse controller is enabled.
Point
- When 'PS/2 Mouse' is [Disabled], the PS/2 mouse is not transparent to devices
controlled by the Windows 95/98 (APM mode) device manager. On Windows 98 (ACPI
mode), An exclamation mark (!) is added to [PS/2 Compatible Mouse Port].
– USB Legacy Emulation
This item set whether the USB keyboard and mouse are usable on OSs not
supporting USB, such as Windows NT.
- Disabled
The USB keyboard and mouse cannot be used on OSs not supporting USB.
- Auto (initial value)
If the PC is booted with either a USB keyboard or mouse connected, the USB
keyboard and mouse can be used on operating systems that do not support USB.
- Enabled
The USB keyboard and mouse can be used on OSs not supporting USB.
Point
When USB keyboard and mouse are used with an OS that does not support USB, such
as Windows NT 4.0, this PC may not operate at full performance. In this case, use PS/2
keyboard by specifying [Disabled] to "USB keyboard/mouse.
4
57