Boot Device Priority; Hard Disk Drive - Fujitsu Deskpower 5000 Series User Manual

Boot Device Priority

This item sets the priority of devices to load the OS using a submenu. Move the cursor to
this item and press the Enter key to display a submenu as shown below.
Main Advanced
Boot Device Priority
1. [Floppy Disk
2.

[Hard Disk Drive]

3. [ATAPI CD-ROM Drive]
Hard Disk
↑↓
F1 Help Select Item
←→
ESCExit Select Menu
The priority is the order of each item. (The lowest number indicates the highest priority.)
Select the device whose priority is to be changed using the ↑ or ↓ key. The selected item
moves up to a higher priority when the space is pressed and moves down to a lower
priority when the - key is pressed.
Point
For booting from a CD-ROM, a CD-ROM containing an OS capable of being booted is
required.
Before booting the power, set the CD-ROM on the CD-ROM drive.
Hard disk drive
This item uses submenus to set the sequence of assigning drives. Click the Enter button
to display the submenus.
The number to the left of each item indicates the sequence of assigning drive numbers.
Select the device whose priority is to be changed using the ↑ or ↓ key. The selected item
moves up to a higher priority when the space is pressed and moves down to a lower
priority when the - key is pressed.
Details of each item are explained below.
1
FUJITSU MPD3064AT-(PM)
This item displays the name of the hard disk drive that is connected. If the hard disk
drive has been replaced, the displayed name changes.
2
Bootable Add-in Cards
This item indicates cards that can be connected to bootable devices, but do not
support the BIOS boot specification (BBS).
78
PhoenixBIOS Setup Utility
Security Power
Drive]
-/Space Change Value
Select :Sub-Menu F10Save and Exit
Enter
Boot Info Exit
Item Specific Help
Use <↑> or <↓> to
select a device, then
press <+> or <Space>
to move it up the
list, or <-> to move
it down the list.
Press <Esc> to exit
this menu.
F9 Setup Defaults