Step 1: Install The Plastic Backbox - AMX MST-1001 Installation & Hardware Reference Manual

4" MODERO S Backbox (Front View)
FIG. 17
NOTE: For typical mounting surfaces, such as drywall, use the locking tabs as the primary method for securing the Backbox to the
surface. For thin walls or solid surfaces, use mounting screws (not included).

STEP 1: Install the Plastic Backbox

Use the included Installation Template to determine the placement of the Backbox in the mounting surface. The outside edges of
the template are the same dimensions as the touch panel, which allows you to troubleshoot possible conflicts with wall edges,
doors, and other potential obstacles.
NOTE: Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
MXD-1001-L - Template, Backbox, 10.1" Touch Panel, Modero S Series (68-2265-03)

S Series Installation Templates
FIG. 18
Modero S Series Touch Panels - Installation & Hardware Reference Manual
Locking Tab (X2)
Locking Tab screw (x2)
Mounting holes (X2) for installing the Backbox into a Rough-In Box (screws not included)
Mounting holes (X4) for use with
mounting screws (not included)
Use these mounting holes to install
the Backbox into thin walls (less
than 0.5" thick) or solid surfaces
Installing Wall-Mount (MXD) Panels
FOR REFERENCE ONLY
25