Installation Recommendations; Plastic Backbox - AMX MST-1001 Installation & Hardware Reference Manual

Installation Recommendations

During any installation, a lack of ventilation may produce conditions that may adversely affect the device's operation. In these
circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the device's
maximum rated temperature.
NOTE: While the outside temperature of the device may be at or below its maximum operating temperature, special care must be
taken before and during installation to ensure that the maximum operating temperature is not exceeded within wall or rack
installation spaces.

Plastic Backbox

S Series wall mount panels comes with a clear plastic Backbox. This Backbox can be used to mount the touch panel into most
standard wall materials. The Backbox can also used to mount the panel into other mounting options.
FIG. 15 shows the Backbox for the MSD-1001-L:

Mounting holes (X4) for installing the Backbox into a Rough-In Box (screws not included)
10.1" MODERO S Backbox (Front View)
FIG. 15
FIG. 16 shows the Backbox for the MSD-701-L:

7" MODERO S Backbox (Front View)
FIG. 16
FIG. 17 shows the Backbox for the MSD-431-L:

Modero S Series Touch Panels - Installation & Hardware Reference Manual
Locking Tab (X4)
Locking Tab screw (x4)
Locking Tab (X2)
Locking Tab screw (x2)
Installing Wall-Mount (MXD) Panels
Locking Tab (X4)
Locking Tab screw (x4)
Mounting holes (X4) for use with
mounting screws (not included)
Use these mounting holes to install
the Backbox into thin walls (less
than 0.5" thick) or solid surfaces
Mounting holes (X4) for use with
mounting screws (not included)
Use these mounting holes to install
the Backbox into thin walls (less
than 0.5" thick) or solid surfaces
Mounting holes (X2) for installing the Backbox
into a Rough-In Box (screws not included)
24