Printing On Envelopes - Sharp MX-3050N User Manual

PRINTER►PRINTING IN A Mac OS ENVIRONMENT

PRINTING ON ENVELOPES

The bypass tray can be used for envelope printing.
• For the types of paper that can be used in the bypass tray, see
• For the procedure for loading paper in the bypass tray, see
• For more information on the procedure for loading paper, see
• When using media such as envelopes that can be loaded only in a specific orientation, you can rotate the image 180
degrees. For more information, see
3-35)".
• It is recommended that you carry out a test print to check the print result before using an envelope.
Select the envelope size in the settings of the application ("Page Setup" in many applications) and then perform the
following steps.
1
When [Enable Selected Paper Type in Bypass Tray] (enabled by factory default) is enabled in "Settings (administrator)",
set the paper type of the bypass tray to [Envelope].
"APPLICABLE PAPER TYPES (page
"LOADING PAPER INTO THE BYPASS TRAY (page
"SELECTING THE PAPER (page
"ROTATING THE PRINT IMAGE 180 DEGREES (ROTATE 180 DEGREES) (page
FTP Print Setup
(1) Select the envelope size from the "Paper
(2) Select [Paper Feed].
(1)
(3) Select the [Bypass Tray (Envelope)] from
(2)
(3)
3-15
Size" menu.
the "All Pages From" menu.
1-62)".
1-71)".
3-14)".