Sharp MX-3050N User Manual page 280

COPIER►OTHER FUNCTIONS
3
Others
Tab Copy
Off
On
Back
To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
To cancel the tab copy setting:
Tap the [Off] key.
4
The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm).
Place the original and tap the [Preview] key.
5
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-77)
► DOCUMENT GLASS (page 1-79)
To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
6
Original
Change Size/Direction.
Proof Copy
Copy 1 page to check
File
Store Data in Folder
Original Copy
Color Mode
Exposure
Select Type/Exposure
Image Shift
(0 ~ 5/8)
1/2
inch Preview
B/W Color
Start Start
4 11x17
Side 2
2-121
Sets an image shift width (tab width).
• Tap the numeric value display indicating the image shift
width, and enter a shift width using numeric keys.
• After the settings are completed, tap
in sequence.
CA
Load the tab paper.
When using the bypass tray, place the paper with the print
side down.
Place the paper so that the sides with the tabs enter the
machine last.
After loading tab paper into the bypass tray, configure the
bypass tray settings as explained in
USING THE BYPASS TRAY (page
and [Back] keys
.
"MAKING COPIES
2-39)".