Sharp MX-3050N User Manual page 755

SYSTEM SETTINGS►USER CONTROL
A Warning when Login Fails
If a login fails three times in succession, a warning is displayed and further login is disabled for five minutes. This
prevents an unauthorized person from attempting to guess a password. (The number of failed login attempts is retained
even if the power is turned off.)
Locking of the operation panel for five minutes can be canceled by selecting [User Control] in "Settings" → [Default Settings]
→ [Release the Lock on Machine Operation Panel].
Disabling of Printing by Invalid User
Printing by users whose information is not stored in the machine, such as printing without entering valid user information
in the printer driver or printing of a file on an FTP server in Setting mode (Web version), can be prohibited.
Locking of the operation panel for five minutes can be canceled by selecting [User Control] in "Settings" → [Default Settings]
→ [Release the Lock on Machine Operation Panel].
Allow Remote Scanner Using Before Login.
This setting specifies whether scanning can be performed by remote operation before a user has logged in.
Automatically print stored jobs after login
When retention is enabled in the printer driver and print data has been spooled to the machine, you can have the spooled
print data automatically print out when the user who enabled retention logs in.
Display Usage Status after Login
When user authentication is enabled, this setting specifies whether or not to display the page counts of a user when the
user logs in.
Login Name Display
When user authentication is enabled, select whether the login name is shown or asterisks are shown.
Item
Display login name
Display Login Name with Asterisk " ".
Include Job Status in user authentication
When user authentication is enabled, this setting specifies whether or not to include the job status in user authentication.
Automatic Logout Setting
When user authentication is enabled, this setting specifies whether or not to enable automatic logout.
The time until logout can be specified up to 240 seconds in increments of 10 seconds.
Case sensitivity of login name is enabled.
Set whether or not to make login names used at the time of user authentication case sensitive. If the checkbox is set to
, login names with identical spelling but different cases (upper and lower) will be identified as different login names.
Therefore, login names with identical spelling but different cases will be authenticated as user names of different users.
If the checkbox is set to
upper and lower case character differences will be authenticated as the user name of the same user.
If the selected checkbox is changed to
exist, the user names that have already been registered are identified as user names of different users.
Show the login name.
Hide the login name with asterisks.
, case sensitivity for login names is disabled. Therefore, identically spelled user names with
, and identical user names with only upper and lower case character differences
Description
7-63