Stopping/Deleting A Job In Progress Or Reserved - Sharp MX-3050N User Manual

BEFORE USING THE MACHINE►STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS
STOPPING/DELETING A JOB IN PROGRESS
OR RESERVED
Tap the job status display and tap the tab for the job that you wish to stop or
1
delete.
2
Print Scan
Job Address
Broadcast004
When you wish to stop a print job being sent from the computer, tap the [Spool] key.
Tap the job that you wish to stop or delete, and then tap [Stop/Delete] on the
3
action panel.
When a screen appears that allows you to confirm that you do want to stop the job, tap the [Cancel] key.
If the machine runs out of paper during a copy or print job, you can cancel the job from the job status screen.
To delete more than one job, operate the check box for [Enter Multi Selection Mode] on the action panel so that it looks
like .
• Printing of a received fax or Internet fax cannot be stopped.
• A job set for transfer in
SETTINGS) (page
Print Image Sending
Fax Internet Fax
Activity Report
Back
Pages Status
Set Time
10:45 07/07 0000/0001 0000/0002 OK
Job Queue
Complete
"FORWARDING RECEIVED DATA TO PRESET DESTINATIONS (INBOUND ROUTING
4-62)" cannot be canceled.
Tap the [Job Queue] key.
1-83