Sharp MX-3050N User Manual page 871

SYSTEM SETTINGS►SETTING MODE FOR FAX
Polling Setting
The following settings are for regular polling memory using the Public Box.
Set Fax Polling Security
When the memory polling function is used, this setting determines whether any machine will be allowed to poll your
machine, or only machines that have been stored in your machine.
Add New
When the Polling Security Setting is enabled, use this setting to store (or delete) the fax numbers of the machines that
are allowed to poll your machine. Up to 10 destination fax numbers can be stored. Each number must be within 20 digits
in length.
Passcode Number Key List
This shows a list of the stored passcode numbers. Select a number from the list and delete it.
Note that these settings do not apply to F-code polling memory.
7-179