Sharp MX-3050N User Manual page 244

COPIER►OTHER FUNCTIONS
3
Others
Erase
Up
Left Right
Down
Back
• Specify the erase edge on the reverse side when erasing edges of one to three sides of Up, Down, Left, and Right on
the front side to scan a 2-sided original.
• If the [Reverse erase position of back face] checkbox is set to
edge on the front side will be erased.
• If the [Reverse erase position of back face] checkbox is set to
will be erased.
Specify the erase width.
4
Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using
the numeric keys.
After the settings are completed, tap
To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
• To cancel the erase setting:
Tap the [Clear] key.
• To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
5
Booklet
Copy Like A Pamphlet
Original
Change Size/Direction.
Clear
2-Sided Copy
Outer Frame
Color Mode
Specify Frame+Center
Background Adjustment
Reverse Erase Position of
The Back Face
Preview CA
B/W Color
Start Start
4 11x17
and [Back] keys in sequence.
2-85
Tap the checkbox of the edge that you
wish to erase, and specify the erase
position.
Check that he tapped checkbox is set to
If the [Outer Frame] key is tapped, the [Up], [Down], [Left],
and [Right] checkboxes are set to
If the [Specify Frame+Center] key is tapped, all the
checkboxes are set to .
, the edge in the position opposite to the erased
, the edge in the same position as on the front side
.
.
.