Checking The Image Before Printing - Sharp MX-3050N User Manual

FACSIMILE►FAX RECEPTION

CHECKING THE IMAGE BEFORE PRINTING

Check the image of received data on the touch panel before printing.
This function can be used when "Settings (administrator)" - [System Settings] → [Image Send Settings]
→ [Common Settings] → [Condition Settings] → [Preview Setting] → [Received Data Image Check Setting] is enabled*.
* The factory default setting is disabled.
Important points when using this function
If the received fax data is not printed or deleted, the fax memory will run low, and the machine will not be able to receive
any faxes. When using this function, you should print the received data as soon as possible without leaving it in the fax
memory.
You can view the remaining fax memory capacity on the fax mode base screen.
When data is received,
Address Book Address Fax Number
Exposure
Auto
Resolution
Super Fine
Original
Job Build
Slow Scan Mode
Mixed Size Orig.
Scan Size
Original Count
100%
Auto
Others
reception memory
Depending on the size of the received data, part of the check image on the touch panel may not appear.
The received data list can be also shown in the job status screen that appears when you tap the job status display.
The received data can be forwarded, deleted, or saved from the received data list.
► FORWARDING RECEIVED DATA MANUALLY (page 4-67)
► SAVING RECEIVED DATA (page 4-69)
1
Select External Application System Information
Event Information
Check Fax
Reception Image
Check Error Box
You can also display the received data list by tapping the job status display and tapping [Check Received Data] on the
action panel of Job Status screen.
is shown at the top of the screen.
Sending History
Call Search Number
Direct TX
Verification Stamp
Call Program
Call Registered settings
Send Same Image
as Fax Address
CA
Preview
Send Size
Auto
Start
Speaker
50%
Maintenance Information Toner Remaining
Check Confidential
Received Data
Release Held
Received Data
Fax Receive
Terminate
Remote Operation
In the System Information, tap the
Exit
[Event Information] tab and tap the
[Check Fax Reception Image] key.
The received data is listed.
4-59