Advertisement
Step 3. Slide the tray back into the enclosure until the latches snap into
place.
Quick Start
Note: Make sure the TARGET drive is equal to or larger than the SOURCE
drive's capacity.
After installing the drives and turning on the Unit, the duplicator will beep,
wait for a set delay and display its firmware version. A few moments later it
will display the COPY function. Pressing ENT at this point will begin a copy
operation immediately.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
