Advertisement
NOTE: This function scans the entire disk before proceeding. Providing a
drive that is as small as possible is strongly recommended.
9-04. Compare Firmware
Used to confirm correct firmware. Connect a drive formatted as FAT contain-
ing one partition with the firmware file in the root directory.
NOTE: This function scans the entire disk before proceeding. Providing a
drive that is as small as possible is strongly recommended.
9-05. Quick Erase HDD
Scans the ports, then quickly erases all sectors on all connected drives.
9-06. H/W Diagnostic
Starts comprehensive tests for LCD, SDRAM, HDD ports, and Flash
memory.
9-07. Load Default
Resets all configuration settings to default.
9-08. Link Option
Enables USB Mode option on the Main Menu. This feature is not supported.
Default setting is ON.
9-09. USB Auto-Link
Automatically enables USB Mode. This feature is not supported. Default
setting is ON.
9-10. COPY HPA
Enables copy functions to duplicate the source drive's Host Protected Area.
Normally this area is defined as not available to a host controller as defined
by ATA/SATA specifications.
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/
Advertisement
