Addonics Technologies HDUS11325DX User Manual
  1. Manuals
  2. Brands
  3. Addonics Technologies Manuals
  4. Disc Duplicator
  5. HDUS11325DX
  6. User manual

Addonics Technologies HDUS11325DX User Manual

1:11 hdd duplicator deluxe
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Target Drive Bay 1 - 5
Target Drive Bay 6 - 11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
User Guide
1:11 HDD Duplicator Deluxe
HDUS11325DX
(
www.addonics.com
Source Drive Bay
Duplicator Panel
Power Switch
)
v3.1.11

Advertisement

Table of Contents
loading

Related Manuals for Addonics Technologies HDUS11325DX

Summary of Contents for Addonics Technologies HDUS11325DX

  • Page 1 T E C H N O L O G I E S Source Drive Bay Target Drive Bay 1 - 5 Duplicator Panel Target Drive Bay 6 - 11 Power Switch User Guide 1:11 HDD Duplicator Deluxe HDUS11325DX www.addonics.com v3.1.11 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:...

  • Page 2: Table Of Contents

    Table Of Contents ... . . Page 3 Basic Instructions ... . . Page 5 Functions ... . . Page 6 Copy HDD ... . . Page 6 Compare HDD ...

  • Page 3: Basic Instructions

    Basic Instructions Installing Drive into the HDD Duplicator For installing a hard drive on the various enclosures that come with the HDD duplicator, refer to the bundled enclosure installation guides. Step 1 Open the source drive door and slide in the 3.5” SATA hard disk Source drive into the drive bay. Close the front panel and using the key provided, turn the key lock to the Lock position.
  • Page 4 Duplicating a drive When the duplicator powers on, it initializes and goes through the steps below Shows the firmware version Initialize SDRAM's status.. HD Duplicator Initialize SDRAM 1-1 Ver: Detect Drives' status. Shows the first function: Detect Drives 1.Copy HD Copy HDD copies data directly from the source hard disk to the target hard disk.

  • Page 5: Functions

    Functions The copy controller has 11 functions in total, with the 11 th (Adv Setup) being a hidden system function that only appears when the ESC key is pressed fo r 2 seconds until there is a beep. These are shown below. 1.

  • Page 6: Copy Hdd

    Copy HDD Copy HDD copies data directly from the source hard disk to the target hard disk. Please make sure that the capacity of the target hard disk is equal o r larger than the source hard disk. Choose option 1 from the menu: 1.

  • Page 7: Compare Hdd

    3. Compare HDD HDD: 11 232.9GB Press ENT to begin the comparison. The LCD will display the following info. Comp-23MB/s 0% 232.9GB 00:00:00 Once the comparison is complete the LCD will display the following info as well as the amount of data on the source hard disk.

  • Page 8: Rescan Bus

    ReScan Bus ReScan Bus allows swapping the source or target in and out without having to reboot the system. Choose option 6 from the menu: 6. ReScan BUS Press ENT to re-scan hardware. The LCD will display the follo wing info. Re-Scan BUS NOW? When the scan is complete the LCD will display the fol lowing info.

  • Page 9: Overwrite

    In Process Elapsed 01:00 Overwrite Overwrite is used to overwrite the data of the hard disk, it will erase all HDDs connected to the duplicator (including Source HDD). There are 3 sub-options: One pass, 3 pass and 7 pass. Choose option 9 from the menu: 9.

  • Page 10: Startup Menu

    Copy Size This option is used to specify the size of the source hard disk for simplifying further copying operations. 10-02. Setup Copy Size Press ENT and the LCD will display a detailed list of options as shown below Copy Size 100%~1% (*MB) Use the Up and Down arrow keys to choose di erent copy si zes.

  • Page 11: Device Info

    Device Info This option is used to display the details of all hard disks connected to the copy controller. 10-06. Setup Device Info Press ENT and the LCD will display each hard disk' information in order as shown below. 0 Source CH: 0 Hitachi 232.9GB System Info This option displays system information.

  • Page 12: Tolerance Size

    Press ENT to enter the following gure. The default is O . Use the Up and Down arrow keys to choose 5 Sec-50 Sec. Auto Start Timer Tolerance Size This option is used to set the tolerance in terms of percentage di erence between the source and target capacity.

  • Page 13: Adv Setup

    Adv Setup Adv Setup o ers expert users access to more advanced system settings. To access this option, hold down the ESC key for two seconds until it appears. 11. Adv Setup Read Error Skip This function sets the system to ignore any errors during the copying process. Normally if there is an error during copying a warning is displayed on the LCD.

  • Page 14: H/W Diagnostic

    Press ENT again and the LCD will prompt you to con rm the er ase operation. All data will be lost,Erase? No Full Erase HDD This function is used to full erase all data on the HDD. Please backup any important data before using this function.

  • Page 15: Load Default

    Load Default Press ESC to return to the main menu then use the ENT button to select. This function resets all settings to their factory default. This function helps th e system recover from errors caused by an illegal operation. 11-07.Adv Setup Load Default Press ENT to enter the following screen.

  • Page 16: Basic Troubleshooting

    Basic Troubleshooting If the LCD blank after the device is turned on, check tha t the power cable is properly connected and that the power supply is on. Error Message When the system is running a copy operation or hardware diagnostics, if the operation is manually terminated by pressing ESC an error message will be show n by the LCD.

  • Page 17: Error Messages List

    Error Messages List Error Messages Description Applied to Source Drive Not Exist! No source HDD exist Copy, Async Copy, Compare, during operating Async Compare, PreScan Source, Source Size, Copy Size, Tolerance Size User Abort! Cancel operating Any function and any time No Drive Exist Device Info No HDD exist during...

  • Page 18: Firmware Update Procedure

    Firmware Update Procedure (Requires one hard drive containing the rmware le): 1. Create a 50MB HDD partition with FAT/FAT32 or NTFS les system on any SATA hard drive 2. Download the rmware and unzip the le to .BIN le format 3.

Table of Contents