1:1 HDD Duplicator PRO HDUSI325 www.addonics.com v3.1.11 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/...
A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary switch is located on the front of the tower. Push the auxiliary switch button to turn on the HDD duplicator. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
Page 4
The copy speed, capacity and time will vary depending on the source hard disk. Once the copying process is complete the LCD will display the following results. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
Once the comparison is complete the LCD will display the following info as well as the amount of data on the source hard disk. Compare OK:1 Fail: 0 Di : 0 www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
Press ENT to re-scan hardware. The LCD will display the follo wing info. Re-Scan BUS NOW? When the scan is complete the LCD will display the following info. Bus re- scan OK! www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
8. Setup Language This option is used to select the system's language support. By default this is set to English. Press ENT to change the Language settings. Language English www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
Copy With Size Press ENT to enter the following gure. The default is O . Use the Up and Down arrow keys to choose On. Copy with Size www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
. (This function currently only e ective in FAT, FAT32, NTFS, HFS, Ext2 and Ext3 partitions.) Fast Copy USB Mode Not Available www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
Update Firmware This function is used to update the system's rmware. Download the latest version of the rmware from the Internet at www.addonics.com. For the complete instructions, visit the rmware update webpage or view the instructions found later in this manual.
Button Test ? SDRAM Test: 8192Kbytes OK Test IDE 0/1 FlashTest: OK Test nished Once the system diagnostics have been completed the "Test finished" message will appear on the LCD. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose Yes. Wipe all data. Continue? No Press ENT and the LCD will show the following info. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
If this function is set to "ON", the system will complete ly copy the data in a source HDD's host protected area. 10-10. Adv Setup Copy HPA The default is "OFF". Use the ENT , Up and Down buttons to change this to "On". www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
3. Press "ESC" key until you see "User Abort" on the LCD screen 4. Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
If you hear the warning signal while the copying function is executing (a beep every 5 seconds), the LCD screen will display the problem status; you may press any button to return to the copy progress screen. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
3. Press "ESC" key until you see "User Abort" on the LCD screen 4. Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again CONTACT US www.addonics.com Phone: 408-573-8580 Fax:...