Quick Compare - Addonics Technologies HDUS11SNDX User Manual

Press ENT to enter the foll
choose 5 Sec- 50 Sec.
Tolerance Size
the source and target capacity. This is to ensure that when the target drive is
smaller than the source drive, the duplication process will not start.
Press ENT to enter the foll
choose 1MB~100MB of source.
BootTime Delay
This opti o n is used to to set boot delay time.
Press ENT to enter the foll
choose 0~99 sec.

Quick Compare

This opti o n is used to set t he size of each comparison unit.
Press ENT to enter the foll
choose 1 Byte/1K/1 0 K/100K/1MB/ 1 0MB/100 Mbytes. (In order to improve the accuracy of pure
data can maintain the default settings.)
www.addonics.com
defau
Auto Start Timer
10-11. Setup
Tolerance Size
defau
Tolerance Size
1MB
10-12. Setup
BootTime Delay
t is 5 sec. Use t he Up and Down arrow keys to
BootTime Delay
5 sec
10-13. Setup
Quick Com pare
t is O
Quick Com pare
Technical Support (M-F 8:30am - 6:00pm PST)
he Up and Down a r row keys to
he Up and Down a r row keys to
he Up and Down a r row keys to
Phone: 408-453-6212 Email: www.addonics.com/support/query/