Advertisement
Setup Options:
6-01. Language
Use this option to select the language of the system, currently only English is
supported.
6-02. Copy Size
Controls how much of the source drive to use for copy operations, in percent-
age. Default setting is ALL (100%).
6-03. Startup Menu
Sets the first menu option to appear after boot. Default setting is Copy HDD.
6-04. Auto Compare
Controls whether or not targets are compared automatically when copy is
complete. Default setting is OFF.
6-05. Copy with Size
Causes duplicate drive to report to an operating system the exact same total
size as source when copy is complete. Works only on drives formatted using
a Master Boot Record. Default setting is OFF.
6-06. Button Sound
Enables audible beep when pressing buttons. Default setting is ON.
6-07. Device Info
Displays information about connected drives. Main display is drive manufac-
turer and size. Press up/down to select drives, ENT to display model number
and firmware revision of selected drive.
6-08. System Info
Displays firmware version and date.
Advanced Setup
9-01. Detect HDD Delay
Sets delay between attempts to detect disk connection or disconnection.
Default setting is 4 seconds.
9-02. Read Error Skip
Sets whether a sector or block may be skipped if a read error occurs on the
source drive. Default setting is OFF.
9-03. Update Firmware
Used to apply firmware updates. Connect a drive formatted as FAT contain-
ing one partition with the firmware file in the root directory.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
