Advertisement
Connecting the Power Cable and Powering On
a. Connect the power cord provided from the wall outlet to the back of
the tower.
b. Push the power button to turn on the HDD duplicator.
The Duplicator Panel
There are four buttons and an LCD on
the panel of HDD Duplicator.
1. LCD shows a function or a
message.
2. Use to scroll up function menus.
3. Use to scroll down function menus.
4. Use to execute a function.
5. Use to cancel a function.
Quick Start
By default, the duplicator will initialize, scan for drives and offer the copy
function. Insert the source and target drives, power up the unit, wait for the
copy function to appear, then press ENT.
Canceling Functions
When selection menu options, canceling is done by pressing ESC. When the
unit is busy performing an operation such as copy, verify, or overwrite, the
operation can be canceled by holding the ESC button until the unit beeps.
Duplicator Functions
The duplicator has three menu sections: The Main menu, Setup Options, and
Advanced Setup Options. Setup Options is accessed through the Main
menu. Advanced Setup Options is accessed by holding the ESC button from
any other menu until the unit beeps.
When the duplicator completes some of the functions it will record a log of
the most recent activity. Select VIEW LOG to review the latest function's
results.
www.addonics.com
Duplicator Panel
Technical Support (M-F 8:30am - 6:00pm PST)
1
Phone: 408-453-6212
Email: www.addonics.com/support/query/
2
4
ENT
ESC
3
5
Advertisement
