Mic (Mic Input); Headphone Monitor - Denon MC6000MK2 Owner's Manual

Top panel
MIC1 LEVEL
MIC2 LEVEL
MIC ON 1/2
DUCKING
  

   
  
  
   
 
 
 

 


ECHO ON 1/2
Front panel
LEVEL MIC2 EQ LOW/MID/HI
SPLIT CUE MIC ECHO
PHONES MIC1 EQ LOW/MID/HI
PAN
Rear panel

MIC (Mic input)

1
MIC ON 1
Press
MIC2 .
SHIFT
When you press the button, it lights up and the MIC input is
switched ON.
2
MIC1 LEVEL
Use
input level.

3
MIC1 EQ LOW/MID/HI
Use
HI to adjust the MIC audio quality.
n Echoing the MIC input
ECHO ON 1
q Press
• When you press the button, it lights up and the echo is
switched ON.
MIC ECHO
 w Turn
n Enabling the ducking function
CUE
The ducking function detects the MIC input and attenuates the
audio signal level of the master output. When using the microphone,
this function prevents the microphone audio from being covered by
the music, making speech easier to hear.
DUCKING
Press
DUCKING
• lights up.
n Outputting MIC audio to external devices
You can output MIC audio together with the master audio from the
booth output terminals.
This function is handy when you do or do not want route the MIC
sources through the BOOTH output.
DUCKING
Press
DUCKING
• flashes.
MIC2 MIC1
MIC1 MIC ON 2
to use and to use
MIC2 LEVEL
or to adjust the MIC
MIC2 EQ LOW/MID/
or
ECHO ON 2
to echo MIC1 and to echo MIC2.
on the front panel to adjust the amount of echo.
.
SHIFT
while pressing .
13

Headphone monitor

There are two methods for headphone monitoring. Switch between
the two as desired for use.
Make sure that your headphone plug is already inserted in the
PHONES
jack.
1
CUE
Press for each channel to select the source to
monitor.
CUE
The selected lights up.
2
Slide SPLIT CUE to select the monitoring method.
SPLIT CUE OFF mode SPLIT CUE ON mode
SPLIT CUE ON mode
• Audio from the channel selected in step 1 (CUE) is output
from the left channel of the headphones.
• The master audio is output from the right channel of the
headphones.
• The sound is monaural.
SPLIT CUE OFF mode
• The channel sound (CUE) selected in step 1 and master
sound output in stereo.
3
Rotate PAN to adjust the balance between the CUE
sound and master sound.
4
Adjust the headphone volume using
NOTE
When using headphones, be cautious to avoid prolonged loud volume
in order to protect your ears.
LEVEL .