Advertisement
DN-X1500S
continued from front page
Other Features
•
Pre Fader Levels (PFL) for Each Channel
All input channel levels can be pre-adjusted to match output
level meter ensuring a smooth transition between fades.
•
Mic Post Feature
Passes the Mic signal into BOOTH, REC or DIGITAL output
signal path. A great feature to avoid feedback in the DJ booth or
unwanted announcements on your recordings.
•
Preset Function
It is possible to customize the machine to your preference by saving
your favorite setting to internal memory.
•
Headphone Output
selector (Split Cue)
•
Booth Output
You are able to pre-monitor any channel and effect through the booth
output in the same manner as you would with your headphones, only
out loud!
•
D.S.P. by Analog Devices
Flex Fader
Tension
torque
adjustment
Specifications
GENERAL
Dimensions
Weight
Power Supply
Power Consumption
AUDIO SECTION
Input Level and Impedance:
8-Line
3-Phono
Effect (Return)
Main Mic
Aux Mic
Output Level and Impedance:
Balanced
Unbalanced
Effect (Send)
Headphone
Frequency Response:
Line
Phono
Mic
Signal to Noise Ratio:
Line
Phono
Main Mic
Total Harmonic Distortion Rate:
Line
Phono
Cross Talk
Channel Equalizer:
Hi
Mid
Low
Microphone Equalizer:
Hi
Mid
Low
Digital Output (COAXIAL):
Signal Format
Output Level
Output Signal Level
Design and specifications are subject to change without notice.
1100 Maplewood Drive
Itasca, Illinois 60143
Tel: 866.405.2154
Fax: 630.741.0652
www.denondj.com
12.2 (W) x 4.3 (H) x 12.9 (D) inch
310 (W) x 110 (H) x 327 (D) mm
6.7 kg, 14.7 lbs.
AC120 V ±10%, 60 Hz
45 W
-14 dBV (200 mV) 50 kΩ/kohms
-50 dBV (3.0 mV) 50 kΩ/kohms
-14 dBV (200 mV) 50 kΩ/kohms
-54 dBV (2.0 mV) 2 kΩ/kohms
-60 dBV (1.0 mV) 1 kΩ/kohms
4 dBu (1.23 V) 150 Ω/ohms
0 dBV (1.0V) 1 kΩ/kohms
-14 dBV (200 mV) 1 kΩ/kohms
0 dBV (1.0 V) 100 Ω/ohms
20 to 20 kHz ±2 dB
20 to 20 kHz RIAA ±2 dB
20 to 20 kHz ±3 dB
85 dB (at Noise Gate ON)
73 dB (at Noise Gate ON)
65 dB (at Noise Gate ON)
Below 0.02%
Below 0.05%
Over 70 dB
+10 dB (8 kHz), -33 dB (15 kHz)
+10 dB (8 kHz), -40 dB (1 kHz)
+6 dB (8 kHz), -40 dB (60 Hz)
+12 dB, -12 dB (10 kHz)
+12 dB, -12 dB (1 kHz)
+12 dB, -12 dB (100 Hz)
IEC958 Type II
0.5 Vp-p 75 Ω/ohms
-6 dB
© 2006 D&M Professional.
All Rights reserved.
Advertisement
