Mute; Time Offset; Navigation Key; Programmable Line (Dn)/Feature Soft Keys - Nortel 2007 User Manual

• To switch to your headset when you are on a handset call, press
handset. Lift the handset to switch back.
• To switch to your headset when you are on a Handsfree call, press
back.

Mute

• While on a call, press
microphone is off.
• Press
• Use

Time offset

When your Business Communications Manager 50 is located in a different time zone from your
system, the display shows the system time, not the local time. Use the Time Offset feature to adjust
the time that appears on the display.
Before you begin, calculate the time difference, in hours, between the server time and local time.
To change the time that appears on your telephone display to local time
1 Tap Feature.
2
Enter *510 using the telephone dialpad.
3
Tap CHANGE.
4
Press * on the telephone dialpad to switch between adding or subtracting time.
5 Using the dialpad, enter the number of hours between local time and system time.
Note: Press # to enter half hour increments.
6 Tap OK.
Note: It can take up to one minute for the change to appear on the display.

Navigation key

The Navigation key on the Business Communications Manager 50 provides all the scrolling
motions (horizontal and vertical) required to navigate the menus.

Programmable line (DN)/feature soft keys

The Business Communications Manager 50 programmable line (DN)/feature soft keys are soft
keys that are not assigned as line or intercom soft keys. Programmable line (DN)/feature soft keys
store internal and external numbers or features to give you one-touch dialing or feature activation.
Refer to "Business Communications Manager 50 buttons, display, and lights" on page
to turn the microphone off. The
again to turn the microphone on.
on a handset, or with Handsfree or headset calls.
Chapter 2 Features and soft keys
and replace the
. Press
button lights when the
IP Phone 2007 User Guide
19
to switch
6.