While on an active call
This section describes features available during an active call.
Placing a call on hold
The Hold feature allows you to suspend a call without terminating it. Follow
this procedure to use the hold feature.
Using the mute feature
Muting prevents the transmission of sounds through the microphone. Follow
this procedure to use the mute feature.
3
A red light appears next to the Mute key, meaning your speaker phone is turned on, but the
microphone is off and the caller cannot hear you.
Copyright © 2006, Nortel Networks
.
To place a call on hold, press the Hold key. The LCD indicator
flashes beside the line on hold.
To retrieve a call on hold, press the line (DN) key beside the flashing
LCD indicator.
1
A red light next to the green, circular Handsfree button means
.
that your speaker phone is turned on.
2
Press the Mute key located under your volume control bar.
Carrier VoIP
Nortel IP Phone 2004 User Guide
NN10300-009 06.04 Standard
(I)SN09U 20 October 2006
51
Nortel Networks Confidential