About Your Programmable Soft Keys; Touch Panel; Calibrate The Touch Panel; Stylus - Nortel 2007 User Manual

Table 3 Tools and Navigation area
Tool icon
The bottom corners of the Tools and Navigation area contain the labels that are associated with the
buttons on the right and left side of the Navigation key.

About your programmable soft keys

Your system administrator assigns the programmable soft keys as line, intercom, or memory soft
keys. For more information, see your system administrator.

Touch panel

You can perform point and click operations on your Business Communications Manager 50 using
the touch panel. The touch panel works with the graphical user interface (GUI) to present keys
directly on the display. Use the touch panel to activate all line/DN keys, feature keys, and soft
keys.
This section also describes how to properly clean fingerprints and smudges from the Business
Communications Manager 50 touch panel.

Calibrate the touch panel

Use the Tools menu to calibrate the touch panel. You are prompted to use the stylus to tap three
targets.

Stylus

You can operate the touch panel using a stylus or your finger. However, it is recommended that
you use only a stylus to avoid damage to the touch panel and to ensure accuracy.
Chapter 1 Getting started with the Business Communications Manager 50
Description
Tap this icon to access the Tools menu,
which includes:
• Network Configuration
• Local Diagnostics
• Touch Panel Setup
• Contrast & Brightness
• USB Devices
• Preferences
Tap this icon to display a virtual keyboard
(pop-up keyboard) for text entry.
The stylus or USB keyboard maybe used to
enter text in some of the applications.
IP Phone 2007 User Guide
11