Using Conference Call; Using The Mute Feature - Nortel 1120E User Manual

32 While on an active call
2
3
4

Using conference call

Follow this procedure to engage in a conference call.
The Three Way Call (3WC) feature allows you to add three calls to a
conference. If six port conference is available, you can add a maximum of
six calls to a conference. If six port conference is available, 6WC appears
beside a feature key in the display.
Step
1
2
3
4
5

Using the mute feature

Muting prevents the transmission of sounds through the microphone. Follow
this procedure to use the mute feature.
Copyright © 2006, Nortel Networks
.
The call is put on hold and a dial tone sounds. On the display, an
indicator flashes beside the line on which the call is held.
Use the dialpad to enter the number to which to transfer the call.
When that number rings or is answered, press the transfer key again.
The call is transferred.
If the call is not answered, press the line key to resume and
terminate the call.
Action
During a call, press the key to which the conference call feature is
assigned, either 3WC or 6WC.
The call is put on hold and a dial tone sounds. On the display, an
indicator flashes beside the line on which the call is held.
Dial the number of the person you want to add to the call.
At this time, you can talk privately to the person you are adding, to
announce the conference.
Press the conference key again to merge the calls.
Repeat steps 2 and 3, to include a maximum of six calls.
If you make a mistake dialing, or a party does not want to be included
in the conference, press the extension key of the conference call
to reconnect to the conference.
Carrier VoIP
Nortel IP Phone 1120E User Guide
NN10300-022 01.02 Standard
(I)SN09U 20 October 2006
—End—
—End—
Nortel Networks Confidential