Remove The Pci Riser Cage - HP HPE ProLiant DL120 Gen9 Maintenance And Service Manual

Remove the PCI riser cage

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to the server or expansion boards, power down the server,
and disconnect all power cords before removing or installing the PCI riser cage.
Power down the server (on page 30).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 30).
o
Remove the server from the rack (on page 33).
o
Remove the access panel
4.
Disconnect all cables connected to existing expansion boards.
5.
Remove the secondary PCI riser cage or PCI blank.
6.
("Access panel" on page 40).
l
Removal and replacement procedures 35