M.2 Ssd Enablement Kit; M.2 Ssd Enablement Board - HP HPE ProLiant DL120 Gen9 Maintenance And Service Manual

Disconnect the cache module backup power cable from the cache module.
6.
Remove the cache module.
7.
To replace the component, reverse the removal procedure.

M.2 SSD enablement kit

M.2 SSD enablement board

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power
input modules, and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any system installation. Improper grounding can cause
electrostatic discharge.
To remove the component:
Power down the server (on page 30).
1.
Remove all power:
2.
Removal and replacement procedures 45