Remove the access panel
5.
Remove the optical drive blank
6.
Four-bay LFF drive model
o
Eight-bay SFF drive model
o
To replace the component, reverse the removal procedure.
Optical drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the chassis
unless all bays are populated with a component or a blank.
To remove the component:
If installed, remove the security bezel
1.
Power down the server (on page 30).
2.
Remove all power:
3.
("Access
panel" on page 40).
("Remove the security bezel
(optional)" on page 29).
Removal and replacement procedures 48