On Demand - Star Micronics TSP100IIILAN Software Manual

Software Manual
The default setting is 3mm.
We recommend 3 mm as being effective for the ECO function; however, backward
feeding is carried out for each cut operation when 10 mm or fewer is specified. To
reduce the printing time, set to 11 mm.

4.5.3. On demand

This function reduces the amount of paper wasted on unnecessary printings by prompting the user to
select whether or not to print the data.
■ Enable on demand
To enable the on demand function, select the check box. When the on demand function is enabled, the
following confirmation dialog box will appear each time data is sent from the computer to the printer.
When YES is clicked, the data will be printed.
When NO is clicked, the printing will be canceled.
93