Renaming An Image; Deleting An Image - Star Micronics TSP100IIILAN Software Manual

Use the image importer to:
• Give your image a unique name using the Image ID Name field
• Adjust image width in 1/8 mm increments using the image width slider
• Select the preferred dithering method
• Adjust dither settings to desired image quality
Note: Each dither method offers different adjustment options. For best results it is
recommended to experiment with the settings to find which setting works best for
any particular image.
After adjusting the image to your satisfaction, click "Use Image" to add the image to the image list and
make it available for use with the TSP100 futurePRNT's Logos and Cropping utility.
4.10.2.

Renaming an Image

(1) Select an image to be renamed, and click "Rename".
(2) The following "Rename image ID" window appears.
Enter the image name, and click "OK".
This renames the target image displayed in the image list.
4.10.3.

Deleting an Image

Select an image to be deleted, and click "Delete".
128
Software Manual