Getting Started - Star Micronics TSP100IIILAN Software Manual

Getting Started

This software supports the following Windows operating systems.
・Windows 10 * 32-bit and 64-bit (except Windows 10 Mobile and Windows 10 IoT Core)
・Windows 8.1 * 32-bit and 64-bit (except WindowsRT 8.1)
・Windows 8 * 32-bit and 64-bit (except WindowsRT)
・Windows 7 32-bit and 64-bit
* Limitation for Windows 10 / 8.1 / 8
・
Star original Printer Driver Function (e.g. Logo Setting) can not be changed from "Modern UI".
However, once the setting of its function is changed from "Desktop mode",these function can
be used on "Modern UI" as well.
・
USB Printer will not be appeared in [Device and Printer] if its power is off.
・
Error status (e.g. Paper empty during printing) will not be shown in "Modern UI".