Creating A Virtual Tcp/Ip Port - Star Micronics TSP100IIILAN Software Manual

4.17.1.

Creating a Virtual TCP/IP Port

Use the following procedure to create a virtual TCP/IP port.
1. Click Add Port.
2. At the following dialog, enter the output port number used by the application.
(If the output port number is 9100, for example, enter "9100".)
Then click [OK].
3. Click the [Apply Changes] button to create the port.
Notes:
Multiple virtual TCP/IP ports can be created, but it is not recommended.
This function is provided to hold the downward compatibility.
153
Software Manual