Printer Font <Star Line Mode Only - Star Micronics TSP100IIILAN Software Manual

4.16. Printer Font <Star Line mode only>
You can convert device fonts of the printer into a standard Windows font for printing. Also, you
can increase the default 24-dot character height to 35-dot for printing. Click the "Printer Font" tab
on the left side of the window.
Notes:
1. This function is available only in the Star Line mode, and not in the ESC/POS mode.
2. Conversion is possible only if the text before the conversion uses device fonts. Text using
a True Type font cannot be converted.
3. Even if different types of device fonts are used before conversion, they will all be
converted to a single, selected font.
4. Conversion is possible only into the characters supported by the Windows 1252 code
(see the table on the next page).
150
Software Manual