Manually Setting An Ip Address (Using The Tsp100Lan Telnet Utility) - Star Micronics TSP100IIILAN Software Manual

Software Manual

6.2. Manually Setting an IP Address (Using the TSP100LAN Telnet Utility)

You can use the telnet command to connect directly to a TSP100LAN printer.
■ Begin with the following preliminary steps to ensure that Telnet is enabled.
1. From the [Start] menu, open the [Control Panel].
2. Select [Programs and Features].
3. Under [Tasks], select [Turn Windows features on or off].
4. When the User Account Control dialog appears, click [Continue].
159