Williams Sound Digi-wave DLT 100 Manual page 6

steps
roles
display
1. Tour guide / conference
2. Master Chairman / Slave
Chairman / Slave setting
3. Address setting
4. Group setting
5. Time setting (CM only)
6. Speaking time setting
7. Save and exit setup mode
DLT chairman master (CM)
CM works as a master device
to control everyone in a group. Guide
has 1 priority to speak all the time and
st
controls operation of other features
Press No - Yes buttons together for 2 Sec to enter setup menu. Then set to 2-way mode
Press menu button once, then press + or – button to set select Master Chairman / Slave Chairman / Slave
Press menu button once, then press + or – button to select between 0-1023. Every DLT must have its own address.
Press menu button once, then press + or – to select 0-1023. (Default is 12) Multi-groups must use consecutive numbers, ie (12,13,14,15)
Press menu button once, then press
+ or – button to set current time
Press menu button once, then press
+ or – button to set speaking time
between 0 - 60 min. ( Default is 0 min )
When setup is complete, press No - Yes buttons together to save and exit
DLT chairman slave (CS)
Assists CM in a group. Has 2
nd
priority to speak
DLT's slave (SLV)
2-way communication with all DLT's in
group. Have 3 priority.
rd
. Press + or – button to select.
7