Related Manuals for Williams Sound DLT 300
Summary of Contents for Williams Sound DLT 300
- Page 1 DLT 300 Digi-Wave Digital Transceiver QUICK SETUP guide MAN 197A...
-
Page 2: Safety Information
BATTERY SAFETY CAUTION! DLT 300 internal battery pack. To reduce the risk of fire or burns, do not attempt to open, disassemble, or service the battery pack. Do not crush, puncture, short contacts or dispose of in fire or water. Do not incinerate or expose to temperatures above 140F (60C). -
Page 3: Operating Instructions
1. This product uses an internal rechargeable Lithium Polymer battery. This battery is not serviceable by the consumer. 2. To charge the battery in the DLT 300, use the supplied charger and cable. Charging time is approximately 5 hours. The Red LED flashes while the unit is charging. The Green LED is on continuously when the battery is charged. -
Page 4: Specifications
DLT 300 Digital Transceiver Specifications Battery type Lithium Polymer with smart charge built-in, 2000 mAH Battery life Up to 14 hrs talk time per charge Power Save Auto Sleep Mode after 5 minutes of no RF signal from Master Charge time 5 hrs. -
Page 5: Limited Warranty
Williams Sound products are engineered, designed and manufactured under carefully controlled conditions to provide you with many years of reliable service. Williams Sound warrants the DLT 300 transceiver against defects in materials and workmanship for two (2) years. During the first two years from the purchase date, we will promptly repair or replace the DLT 300 transceiver. -
Page 6: Customer Service
(RA) and shipping instructions. This is a quick setup guide. For a detailed system manual, please visit our website. 10300 Valley View Rd • Eden Prairie, MN 55344 800-328-6190 / 952-943-2252 • FAX: 952-943-2174 www.williamssound.com ©2015 Williams Sound LLC MAN 197A...
Need help?
Do you have a question about the DLT 300 and is the answer not in the manual?
Questions and answers