Specifications - Williams Sound Digi-wave DLT 100 Manual

100
DLT

specifications

Dimensions
103 x 62 x 11mm (4.1 x 2.4 x 0.4 inches)
Weight
80g (2.8oz) including battery
Color
Black and silver
Enclosure
Shatter resistant PC/ABS plastic
Battery type
Li Polymer with smart charge built into transceiver
Battery life
Up to 14hrs talk time per charge
Charge time
5hrs. TFP 045 with cable and international adapters
Optional two-bay charger CHG 102
Channels
Up to 15 simultaneous channels (Interpretation mode)
Up to 4 simultaneous groups (two-way mode) must be
consecutive; ie: 11, 12, 13, 14
Operating frequencies
2.4GHz (ISM band) 2.402 – 2.476GHz FHSS
Frequency response
150 – 11KHz
S/N ratio
69dB (A weighted)
THD
0.33 %
*Depending on environmental conditions
Microphone input
Internal microphone (disabled when MIC jack engaged)
and 3.5mm stereo jack (tip/sleeve) with electret
microphone bias, adjustable gain with 63dB range.
Audio output
Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
Internal speaker (disabled when ear jack engaged) 16mW
@ 33Ω
Range
Up to 100ft outdoors and 200ft indoors*
Modulation
GFSK, binary CDMA
RF output
14dBm Max
Security code
87 bit encryption
Controls
Front panel push buttons for volume up/down, group
select, menu access and selection, voting, timer, time,
MIC on/off and power on/off. System reset button
(rear panel)
Output
3.5mm stereo/mono jack
30 pin charging jack with audio out to base stations
Side tone
-12dB below volume
Speaker
Internal speaker (disabled when ear jack is engaged)
Indicators
LCD (Group, channel, volume level, battery status, mode,
signal strength)
LED's (charge status, voting)
Red LED around talk button when enabled
Amber LED signifying voting feature activated.
Maximum presenters
Two presenters at any given time
Approvals
FCC, Industrie Canada, CE, C-tick, RoHS, WEEE
Warranty
2 years parts and labor (90 days on accessories).
19