Williams Sound Digi-Wave DLT 100 Quick Manual
  1. Manuals
  2. Brands
  3. Williams Sound Manuals
  4. Receiver
  5. Digi-Wave DLT-100
  6. Quick manual

Williams Sound Digi-Wave DLT 100 Quick Manual

For tourguide systems. tourguide + interpreter.
Hide thumbs Also See for Digi-Wave DLT 100:
1
2

Advertisement

Table of Contents

Overview:

One guide addressing the tour party (group) who are either listening directly to the
tourguide (floor language) or to the interpreter(s) language.

TOURGUIDE USE DLT100

START
HERE
——>
Plug-in the headworn microphone
Touch and hold for power on/off.
The TALK button is illuminated and the
microphone will be live (leave this ON).
Channel = 00, the floor language
Your hire system will normally be sent out ready to use, configured to the default settings for
Simultaneous Interpretation Mode (SI) and will be on Group 17.
Turn to next page for setup of the DLR50 receivers (listen only).
The table below shows the setup procedure, should this be needed.
0845 5576555
www.tourguide-systems.co.uk
DigiWave hire system
QUICK GUIDE—Tourguide + Interpreter(s)
The main speaker

INTERPRETER(S) USE DLT100

Plug-in the headset/boom microphone
Touch and hold for power on/off.
The TALK button is illuminated and the
microphone will be live (leave this ON).
Channel = 01, first interpreter's language
Page 1
Out of hours try:
07973 395180 or 07973 759174

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Digi-Wave DLT 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Williams Sound Digi-Wave DLT 100

Summary of Contents for Williams Sound Digi-Wave DLT 100

  • Page 1 DigiWave hire system QUICK GUIDE—Tourguide + Interpreter(s) Overview: One guide addressing the tour party (group) who are either listening directly to the tourguide (floor language) or to the interpreter(s) language. TOURGUIDE USE DLT100 INTERPRETER(S) USE DLT100 The main speaker START HERE ——>...
  • Page 2 DigiWave hire system QUICK GUIDE—TOURGUIDE + INTERPRETER MODE Once you have switched ON the DLT100 for the tourguide and interpreter(s) you can proceed to switch ON the DLR50 receivers for the tour party. TOUR PARTY LISTEN USING DLR50 WITH A PLUG-IN EARPIECE, HEADPHONES, EARDEFENDER...

This manual is also suitable for:

Digi-wave dlr 50

Table of Contents