Williams Sound Digi-wave DLT 100 Manual page 12

1
Press and hold POWER button for 2
seconds to turn DLT 100 on
DLT 100
2
Press NO and YES button together
for 2 seconds
3
Mode icon will blink on the LCD
screen
Press ( + ) button, the mode will
change in sequence above. Press
( - ) button for reverse sequence
Note: In Interpretation Mode, 4
different applications can be used
as listed below. Each has a different
role but they all can be used in
Interpretation Mode.
4
Press ( - ) or ( + ) button to select
mode
Interpretation Modes
Repeater - Extends the range for each
channel
Receive Only - For listening to selected
interpretation channel
Main Speaker
( Floor )
Interpreter
Listens to main speaker and transmits
interpretation to receive only units
13