Encoder Scale Replacement - Roland SP-300 Service Manual Book

3 Replacement of Main Parts

3-10 ENCODER SCALE REPLACEMENT

Remove the following covers.
1
LEFT COVER
I/S COVER
TOP COVER
FRONT RAIL COVER
FRONT COVER
3
Turn on the SUB POWER SW while pressing the Left,
2
Right and Down keys to enter the SERVICE MODE.
Select [CAP&WIPER CTRL] > [CAP] > [OPEN], and
3
press the [ENTER] key. The CAPPING UNIT moves
down and allows you to move the HEAD CARRIAGE by
hand.
Move the HEAD CARRIAGE slowly leftwards.
4
Be careful that the head does not strike the
media or media clamp.
3-40
FRONT RAIL COVER
LEFT COVER
FRONT COVER
[ ], [ ], [ ] + POWER ON
[MENU] key
MENU
SERVICE MENU
SERVICE MENU
CAP&WIPER CTRL
CAP&WIPER CTRL
CAP
CAP
OPEN
TOP COVER
I/S COVER
[ ]
[ ]
[ENTER]