Automatic Crop Mark Detection; Easy To Perform Alignment For Print And Cut - Roland SP-300 Service Manual Book

• Automatic crop mark detection

Easy to perform alignment for print & cut
It is possible to read the crop marks automatically when
sending the cutting data through Roland COLORIP or
Windows Driver.
**
SP-300 can not read the Crop Marks automatically without the
command to read them from RCR or Windows Driver.
Note :
Set the media so that the crop marks are
aligned with the cutter protection before sending
the cutting data.
Cutting Function_Crop Mark
Cutting Function_Crop Mark
A
Crop marks
Cutter Protection