Service Mode - Roland SP-300 Service Manual Book

4 Adjustment

4-2 SERVICE MODE

[ ], [ ], [ ] + POWER ON
[ MENU ] key
SERVICE MENU
HEAD RANK
SERVICE MENU
4
SERIAL NO.
SERVICE MENU
CAP&WIPER CHECK
SERVICE MENU
SENSOR CHECK
SERVICE MENU
KEY CHECK
SERVICE MENU
LCD/LED/BUZ CHK
4-2
HEAD RANK
HEAD 1
HEAD RANK
HEAD 2
This menu is used for entering the HEAD RANK for each HEAD with 33 digit number and alphabet.
The digits can be changed with [ ] and [ ] keys and parameters can be changed with [ ] and [ ] keys.
Press the [ENTER] key to save the settings. Warning sound comes out when the CHECK SUM is not correct.
SERIAL NO.
ZR50000
This menu is used for entering the Serial No. of the machine.
The digits can be changed with [ ] and [ ] keys and parameters can be changed with [ ] and [ ] keys.
CAP&WIPER CHECK
This menu is used for checking the CAP & Wiper movement.
1. Move the Carriage to the position where it is above the Platen by hand.
2. Press the [ENTER] key to check the Cap, Wiper, Cap Motor, Cap Sensor, Wiper Motor and Wiper Sensor.
3. Checking finishes when the COMPLETED message appears.
FRSHOCPLWcw
*** **
This menu displays the status of the sensors. When the sensor is ON, * will be displayed.
Alphabet in the menu stands for F: Front Paper Sensor, R: Rear Paper Sensor, S: Crop-mark sensor,
H: Head Origin Sensor, O: Origin Sensor,C: I/S Cover Sensor, P: Maintenance Cover Sensor,
L: Pinch Roller Sensor, W: Paper Side Sensor, c: Cap Sensor, w: Wiper sensor,
P: Display in the Maintenance Cover Sensor
R : I/S Cover is ON.
L : Maintenance Cover is ON.
* : I/S Cover & Maintenance Cover are ON.
Blank : I/S Cover & Maintenance Cover are OFF.
Alphabet of the 2nd page stands for Cartridge Sensor of each color and Ink Empty.
Blank : No Cartridge, Ink remaining
C : Cartridge installed, Ink remaining
E : No Cartridge, Ink empty
* : Cartridge installed, Ink empty
KEY CHECK
NONE
This menu is used for checking the panel keys. [NONE] will be displayed at the bottom row of the
LCD if no key is pressed. The name of the key being pressed will be displayed This menu finishes
when the [ ] key is pressed or it is left without pressing any key for 10 seconds. When there is any key
that has not been pressed, the name of the key will be indicated with the beep sound.
Secondary power cannot be turned off even pressing the SUB POWER SW while in this mode.
As per display
This menu is used for checking the LCD, LED and the Buzzer. While in this mode, the function check
of the LCD, LED and the Buzzer can be performed. All turning ON/OFF test of the LED,
Contrast ON/OFF test of the LCD, back light test of LCD, Buzzer ON/OFF test, Displaying the Cursor
key of the LCD, all characters of LCD will be displayed.
HEAD RANK 1
1234567 (1/5)
HEAD RANK 2
1234567 (5/5)
NOW PROCESSING..
CAP&WIPER CHECK
COMPLETED
1234
* EC