Tool Height Adjustment - Roland SP-300 Service Manual Book

4 Adjustment
4-11 TOOL HEIGHT ADJUSTMENT (Referential Time : 20min.)
[About TOOL HEIGHT ADJUSTMENT ]
This adjustment is for getting correct Tool Pressure when cutting is performed.
When this adjustment is not performed correctly, lines are cut like dashed lines or
lines may be cut strongly beyond necessity.
4
Remove the FRONT COVER and FRONT RAIL COVER.
1
Turn on the sub power switch while pressing [ ], [ ] and
2
[ ] keys to enter the SERVICE MODE.
Select [FORCE ADJUST] in the SERVICE MODE.
When you enter the [FORCE ADJUST] menu,
you can move only the TOOL CARRIAGE.
Remove the TOOL CARRIAGE COVER.
3
4-42
FRONT RAIL COVER
FRONT COVER
[ ], [ ], [ ] + POWER ON
[MENU] key
MENU
SERVICE MENU
SERVICE MENU
FORCE ADJUST
TOOL CARRIAGE COVER