Tool/Crop Mark Sensor Position Adjustment - Roland SP-300 Service Manual Book

Chapter 2
Chapter 2
Tool / Crop Mark Sensor
Tool / Crop Mark Sensor
Position Adjustment
Position Adjustment
• Purpose
It is design to calibrate the offset in the relative positions
of Tool and Crop Mark Sensor.
• Necessary when...
1. Main Board is replaced.
2. Tool Carriage is replaced.
3. Crop Mark Sensor is replaced.
• What happens if not adjusted?
Positions of printing and cutting images will be shifted.
• Necessary Tools
Media (Factory Standard : PET-G)
- 9 :
- 9 :