Service Adjustment Tool; Peck.exe Ver.1.3 - Roland SP-300 Service Manual Book

Chapter 2
Chapter 2

• PECK.exe ver.1.3

Followings can be done easily through the USB port.
Note : It is necessary to install the SP-300 Windows Driver in
your PC enable the USB connection before using
PECK3.exe.
1. Receive Service Report &
History Report.
2. Receive all parameters
on the Mainboard.
3. Send the parameters to
the Mainboard.
4. Set the Head Rank.
5. Firmware Upgrade
-

1 : Service Adjustment Tool

- 1 : Service Adjustment Tool
SP-300 & ProII series are supported.